A residential AC system is a 12 15 year decision. Get the design right and you’ll forget you have it. Get it wrong wrong tonnage, wrong SEER2 for the climate, undersized return air, a duct system that the new equipment can’t push through and you’ll be calling a different company in 18 months wondering why your electric bill is up and your humidity won’t stay below 60%.

We don’t sell off a thumb rule sized by square footage. Every Air We Go installation quote starts with a Manual J load calculation that accounts for your home’s actual orientation, window area, insulation, ceiling height and infiltration. That tells us the real cooling load which is almost never what a quick walk through estimator would guess.

From there we design the rest of the system to match: properly sized return air (under sized returns are the #1 cause of premature equipment failure in Florida), R 8 insulated ductwork, a thermostat with proper humidity control, and where it makes sense, a variable speed inverter for the kind of quiet, tight humidity control Florida actually needs.

Install day is structured. Drop cloths from the door to the work area, old equipment removed and hauled away, pad re set and leveled, new system mounted with hurricane rated tie downs to current code, refrigerant evacuated and weighed in, system commissioned and the readings recorded on your warranty record. You get a walkthrough at the end and a binder with every document load calc, equipment cut sheets, warranty registration, and the closed permit.